Wheelchairstrap

😍 QLK-150 (UK) Docking System Kit with Base Mount and Stabilizer Arm | Q04S151 😍
by Q'Straint starting at $1,195.00

QLK-150 (UK) Docking System Kit with Base Mount and Stabilizer Arm

The next step in independent wheelchair securement from Q'Straint, QLK-150 offers more options and features than any other docking system on the market. QLK-150 was designed to work simply, function intelligently, and look beautiful.

SKU: Q04S151

Kit Includes:

* (1) QLK-150 Docking System (Q041000)
* (1) QLK-150 Dash Control (QS99007)
* (1) Electronic Control Module (ECM) (QS99012)
* (1) Stabilizer Arm and Base
* (1) Auxiliary Release Switch
* (2) Wire Clips
* (1) Mounting Hardware Kit

PDF QLK-150 BROCHURE

QLK-150 PRODUCT SPEC SHEET

EXTENSIVE CRASH TESTING

The first and only docking system that meets the higher WC/19 wheelchair load requirements. Also, the only system tested Forward, Rearward, and Sideways.

SLIM, FLEXIBLE DASH CONTROL

Compact design that blends in to modern vehicle interiors. Features a larger touch area and embedded LED indicators to show system status.

ADVANCED STABILIZER

Our unique Advanced Stabilizer allows the QLK-150 to be installed in the driver position. The stabilizer attaches easily to the QLK-150 cover and improves stability.

LOWEST/HIGHEST CLEARANCE

Optional base mounts allow for the docking system to be mounted from 1.5″ (38mm) all the way up to to 4″ (100mm). An optional 1.5″ floor mount allows previously un-dockable lower ground clearance wheelchairs such as the Jazzy Select 6 or Ultra Elite, to be easily secured.

SMART PROCESSOR

The newly designed microprocessor controller sends data directly from the control pad to the base unit putting the latest technology at your fingertips. A single micro-switch eliminates the need for a separate thermal switch, allowing for improved electrical reliability.

ECO FUNCTIONS

When the user is not in the docking base (sleep mode), the system draws just 76.5 microamps (0.0000765 amps), or about 5 times less than other docking systems. The solenoid release also features a low current draw of between 4.2 – 9.1 amps (versus the normal 18 amps).

PLUG & PLAY SERVICE

Quick connectors and a removable cover allow for faster maintenance and easier servicing. Screw terminals are easily removed for faster wire routing and eliminate the need for any additional crimping or soldering.

REMOTE

Seamlessly pairs with your new or existing QLK-150 docking system.

HEAT-TREATED STEEL

All components are made of high-grade steel with eco-friendly coating, and each component (except for base mounts) is specially treated to increase strength and durability, reduce entry channel warping, and prevent corrosion.

SMALLER FOOTPRINT

The QLK-150 features a castor interference with shortened cover reducing the size by by 1.5″ (38mm) over the QLK-100, eliminating any castor interference.

FLUSH SURFACE WITH TAPERED CHANNEL

Eliminates snags and gives users a full 3/16″ (5mm) of additional bolt clearance. The tapered channel guides the user in, making it easier to dock.

OVER-TORQUE PROTECTION

Prevents system lockup if the internal hardware is accidentally over-torqued.

Vehicle Applications: Minivan, WAV

QLK-150 MEETS OR EXCEEDS THE FOLLOWING STANDARDS AND REGULATIONS:

Fully ADA Compliant
FMVSS
CMVSS
SAE J2249
CSA Z604
AS2942
ISO 10542-1

Meets the requirements of WC18 & is compatible with WC19 wheelchairs.

Crash tested at 30mph/20g in forward, rearward and sideways facing directions

*Independent testing documentation available upon request.
Always demand up-to-date crash testing from a certified facility.

WARRANTY

3 years* limited warranty coverage.

Shop Now 👉👉 https://shortlink.store/5xv9vngmw2hl

😍 Q’Straint Shoulder Belt Male Pin Adapter | Q8-3030-A 😍
by Q'Straint starting at $35.00

Q’Straint Q8-3030-A Shoulder Belt Adapter

Q’Straint Shoulder Belt Adapter provides an attachment point for a QRT Shoulder Belt.

SKU: Q8-3030-A

Shop Now 👉👉 https://shortlink.store/tpifyjjcyjyf

😍 Rascal Electric Scooter Bracket 😍
by SnapIt! starting at $8.00

Rascal Electric Scooter Bracket

The Rascal Electric Scooter Bracket is designed for easy attachment to the underside of your mobility device’s armrest. It utilizes the existing screw located approximately 1 1/2 inches from the end of the armrest. To install, simply remove the screw with an Allen wrench, place it through the counterbore side of the bracket, and retighten it into the armrest.

Once the bracket is securely installed, you can snap any SnapIt! accessory directly into it.

Key features:

* The mounting arm attaches with screws to the underside of the armrest.
* The bracket is device-specific and fits into pre-existing screw holes.
* Installation instructions are included with the bracket.

Note: The armrest shown in the installation photos may differ in appearance from your own, but the installation steps remain the same.

Each SnapIt! accessory includes a bracket. This product serves as a replacement or additional bracket, allowing you to use your SnapIt! cup or phone holder on a second mobility device. Accessories can be easily snapped onto any SnapIt! bracket.

Shop Now 👉👉 https://shortlink.store/nf4ov1nncw_n

😍 Q04BR075 | Permobil Chairman/C Series QLK Bracket 😍
by Q'Straint starting at $300.00

Permobil Chairman/C Series QLK Bracket - Q04BR075

Click here to view instructions as a PDF

Manufacturer
Permobil

Series
Chairman

Model
2K(C2K), 2S(C2S)

QLK Part #
Q04BR075

Manufacturer
Permobil

Series
C Series

Model
C400

Notes
Works with all seating options

QLK Part #
Q04BR075

Manufacturer
Permobil

Series
C Series

Model
C500

Notes
Please measure wheelchair clearance. Ground clearance varies between 2.5″ – 3″ depending on factory options and settings (ie: attendant driver controls, actuating seats, wheels, etc…). We also recommend use of QLK-150 for additional clearance. Works with all seating options.

QLK Part #
Q04BR075

Shop Now 👉👉 https://shortlink.store/kbn9sdkitcgz

😍 Series L Track Double Lug Stud Fitting | FE200739 😍
by Q'Straint & Sure-Lok starting at $6.75

Series L Track Double Lug Stud Fitting

This fitting is used as a bolt-on anchoring point for Series L Track applications where higher strength than the FE200744 is required.

Included:

One (1) Wing Bolt
One (1) Washer
One (1) Nut

SKU: FE200739

Shop Now 👉👉 https://shortlink.store/upx3fahnywvg

😍 Sure-Lok FF600 Series Wheelchair Retractor Kit S Hooks & Occupant Restraint | FF612S-4C 😍
by Sure-Lok starting at $590.00

FF600 Series Wheelchair Retractor Kit S Hooks & Occupant Restraint

A proven, convenient system to secure wheelchair passengers. The FF600 Retractor Series System, which includes the FF612-4C, is the most convenient and proven wheelchair securement system you can buy today. The FF612-4C wheelchair securement kit includes 4 retractors for series L-track.

The ergonomically designed handle is quick and easy to grasp, the dual, 24-teeth sprocket mechanism enables the user to more easily increase tension on the webbing and the track fittings are specifically designed to ensure free pivoting action for optimum belt alignment.

Kit Includes:

* Qty 2 Right Hand FF600 Series Retractors with L Track Fitting and S-Hook | FE200855
* Qty 2 Left Hand FF600 Series Retractors with L Track Fitting and S-Hook | FE200907
* Qty 1 Integrated Combination Belt With Height Adjuster | FE200727HA

FF600 Restraint Brochure

FF600 retractors, when properly used with a complete Sure-Lok System (comprised of wheelchair tie-down, a complete occupant restraint system, including lap and shoulder belt), track and anchorages are designed to meet the following requirements where applicable:

* 30mph/20g Impact Test Criteria per SAE J2249
* 30mph/20g Impact Test Criteria per Canadian Z605 Standard
* 30mph/20g Impact Test Criteria per National Standards for School Buses
* 49 CFR Part 38 Americans with Disabilities Act (ADA)
* 49 CFR Part 571.222 (FMVSS 222) School Bus Passenger Seating and Crash Protection

SKU: FF612S-4C

Shop Now 👉👉 https://shortlink.store/cm5gdwotbf91

😍 Q04BR047 | Permobil M Series M 300 QLK-150 Bracket 😍
by Q'Straint starting at $306.00

Permobil M Series 300 - Q04BR047

Qlk-150 Bracket: Q04BR047

Qlk-110 Bracket: Q04BR047

This Kit features our QLK-150 Advanced Stabilizer (QS99027). QLK-110 has standard 1-1/16″ clearance. QLK-150 with 2.5″ base mount (QS99022) has 3/4″ of additional clearance. QLK-150 with advanced stabilizer (QS99027) can be used to eliminate need for a standard large stabilizer fork. Group 34 batteries suggested.
Wheelchair Measurement Guide

DEVICE INFO:

Manufacturer

Permobil

Series

M Series

Model

M 300.

M 300 HD, M 400

Qlk-150 Bracket

Q04BR047

Qlk-110 Bracket

Q04BR047

Type

B2

Instructions

Click here to view as a PDF

SKU: Q04BR047

Shop Now 👉👉 https://shortlink.store/gdrjhnijjrbv

😍 Q'Straint 4 QRT Deluxe Retractors with L-Track Fittings | Q-8101-L 😍
by Q'Straint starting at $532.00

4 QRT Deluxe Retractors with L-Track Fittings

Kit Includes:

* Qty 4 QRT Deluxe Retractors w/PLI | Q8-6200-L
* * L-Track not included

THE RETRACTOR THAT CHANGED THE INDUSTRY

The QRT Deluxe is the original self-locking and self-tensioning retractable system. The Deluxe features dual tightening k***s and is considered the industry standard.

* QRT Brochure
* Vehicle Applications: School Bus, City Bus, Coach Bus, Rail, Community Transport, Minivan, WAV
* Warranty: 3 years* limited warranty coverage.

FEATURES

* DUAL TIGHTENING K***S - Provides additional tensioning if needed.
* AUTOMATIC, SELF-LOCKING - Allows easy, one-handed hook-up of wheelchairs.
* SELF-TENSIONING - No manual tensioning required. Retractors automatically take up ‘slack’ to ensure wheelchair passenger is always secured.
* POSITIVE LOCK INDICATOR - Patented feature clearly indicates when fitting is locked in anchorage (L-track application only).
* INTERCHANGEABLE - Eliminates confusion; no right, left, front or rear locations.
* LOW PROFILE & COMPACT - No mounting bracket allows retractors to fit under most footrests.
* ACCOMMODATES LARGER WHEELCHAIRS - Reduced overall retractor length leaves more room for wheelchairs.
* UNIVERSAL DESIGN - Accommodates virtually all wheelchair designs, including scooters.
* ULTRA-DURABLE - Constructed from hardened steel and coated in zinc for maximum corrosion resistance.
* J-HOOK - Reduces twisting of belts and ensures proper securement with a quarter turn accommodating virtually all wheelchair designs.
* FOOT RELEASE LEVER - Easy release eliminates the need to bend down.

SKU: Q-8101-L

Shop Now 👉👉 https://shortlink.store/angpfrtjv0wf

😍 Secure Webbing Loop 11", 14", 18" 😍
by Q'Straint starting at $5.15

Secure Webbing Loop

Secure Loop, Used to secure a mobility device when hooks cannot be attached to the wheelchair frame. Available in various lengths and colors.

* Used to secure a mobility device when hooks cannot be attached to a wheelchair frame.
* Available in various lengths and colors.
* Contact Sales for more information.

Includes:

* (1) Secure Loop

Shop Now 👉👉 https://shortlink.store/t3koh2bvacwv

😍 QLK Stabilizer Kit | Q04C6916 😍
by Q'Straint starting at $40.00

Q'Straint QLK Stabilizer Kit | Q04C6916

Features:

* Stabilizer kit to be installed with existing QLK docking systems
* Comes standard in some QLK bracket kits
* This kit is compatible with the QLK and the QLK-150

SKU: Q04C6916

Shop Now 👉👉 https://shortlink.store/ykejwcveh3_r

😍 Premium Lap Belt for Series A-Track Length: 108" | FE200612 😍
by Sure-Lok starting at $110.00

Premium Lap Belt for Series A-Track

SKU: FE200612

Length: 108″

The Parallel Lap Belt attaches directly to the floor track or plates and used with a shoulder belt provides a complete occupant restraint system that secures the passenger separately and independently from the wheelchair securement system. Each Premium Lap Belt contains three push-button buckles for greater versatility of attachment, two webbing adjusters for increased placement capability and web stiffeners for ease of installation. Each Standard Lap Belt contains a single push-button buckle and two webbing adjusters for increased placement capability.

Shoulder Restraint Application / Sizing

Sure-Lok Occupant Restraint Systems

Parallel Lap Belts are not wheelchair securements. Secure the wheelchair with a Sure-Lok Wheelchair Tie-Down System.

Always secure the occupant in the vehicle with a complete Sure-Lok Occupant Restraint System, consisting of lap and shoulder belts. Secure the wheelchair in the vehicle with a Sure-Lok Wheelchair Tie-Down System.

Shop Now 👉👉 https://shortlink.store/wmxkryl876e3

😍 Tool Free Adjustable Drink Holder For Mobility Products | A001T 😍
by SnapIt! starting at $28.00

Tool-Free Adjustable Drink Holder

* GO HANDS-FREE! The perfect item to free hands to ensure your safety.
* Tool-Free Adjustable Drink Holder conveniently snaps to 7/8", 1" or 1 1/8" diameter tubing commonly found on walkers, wheelchairs, scooters, and transfer chairs.
* Please choose tubing size corresponding to your need.
* Drink Holder adjusts to hold a wide variety of drink containers from large 3 5/8" diameter sport drink bottles down to 2.5" diameter small water bottles and aluminum cans.
* Drink Holder snaps in and out of the MultiMount bracket for convenient storage.
* Shown attached to a standard aluminum walker.
* Adjustable MultiMount Drink Holder
* Drink Holder snaps in and out for convenient storage.
* 3.5" Tall X 3.5" Wide X 4.5" Deep
* Lifetime Repair/Replace warranty.
* UV Stabilized HDPE (High-Density Polyethylene)
* Stainless Steel Hardware
* Manufactured and Assembled in Texas, USA

SKU: A001T / A001M

ITEM: 1 Tool-Free Adjustable Drink Holder

WT: 1.5 lbs

Shop Now 👉👉 https://shortlink.store/yk-sfzizsyci